Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.
Is there any possibility that multiple APs can be registered with one WLC.
But if we use option 60 it should be re write/ Over write for the VCI string like
Option 60 ascii "Cisco AP c1250"
Option 60 ascii "Cisco AP c1520"
Option 60 ascii "Cisco AP c1130"
i-e- First should be over write by second and second by third :)
Please help me i need combination of outdoor and indoor by mesh.
Regards and Thanks in advance
"Is there any possibility that multiple APs can be registered with one WLC." < --- Yes. The WLC can "control" from 6 AP's to 150 (soon 500).
Can you please more specific and send more clarification ?
In my experience, option 60 is entirely unnecessary. In a properly designed network, the only DHCP clients on your wireless management network are your APs, so just offer option 43 to all of them.
The answer to the question you asked, is "yes."
Can you be more specific about what else you would like to know?
Thanks a lot :)