Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Multiple LAP types and VCI strings

Hello,

I'm installing a WLC with 1232AG & 1240AG access points and i would like to know if it's possible to configure 2 different VCI strings for the same DHCP scope, or should I have a scope for each LAP type with the corresponding VCI string?

Thanks for the help

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Multiple LAP types and VCI strings

Hi Friend,

You can have different VCI strings for same DHCP scopes. There are different models of LWAPP AP which use different VCI strings and all the APs can be in same DHCP scope.

HTH

Ankur

*Pls rate helpfull post

2 REPLIES
Cisco Employee

Re: Multiple LAP types and VCI strings

Hi Friend,

You can have different VCI strings for same DHCP scopes. There are different models of LWAPP AP which use different VCI strings and all the APs can be in same DHCP scope.

HTH

Ankur

*Pls rate helpfull post

Community Member

Re: Multiple LAP types and VCI strings

Hi Ankur,

Thanks a lot for the quick reply, I can now go on with my installation.

Have a nice week-end!

Luis

177
Views
0
Helpful
2
Replies
CreatePlease to create content