Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Multiple SSID no DHCP on guest

I currently have Aironet 1040 AP that I am using stand alone. I am looking to have a second SSID for guest network. only problem I am having is how to get DHCP to those clients?                  

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Multiple SSID no DHCP on guest

That would definitely be a problem. You would not be able to segment the traffic. You would need a managed switch and a router at the minimum.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
8 REPLIES

Multiple SSID no DHCP on guest

Hi Matt,

Welcome to CSC.

You will want to trunk at the switch port and add vlans on the ap. See below example.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665ceb.shtml

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________
Community Member

Multiple SSID no DHCP on guest

George,

Thanks for the reply. I do not have any managed switches on this network. I suspect this may be a critical missing piece. I was hoping there was some way to accomplish this using only the AP configuration?

Hall of Fame Super Silver

Re: Multiple SSID no DHCP on guest

That would definitely be a problem. You would not be able to segment the traffic. You would need a managed switch and a router at the minimum.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Re: Multiple SSID no DHCP on guest

So would an WS-C2960PD-8TT-L be sufficient?

Re: Multiple SSID no DHCP on guest

Yes, that would work as it is capable of multiple VLANs.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Hall of Fame Super Silver

Re: Multiple SSID no DHCP on guest

You just need to make sure you have a router that supports multiple vlans.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Community Member

Re: Multiple SSID no DHCP on guest

So I guess just to make sure I can accomplish this correctly I am attaching a quick diagram of my setup. I have two buildings connected by a wireless bridge. If I place a managed switch on just the side with the firewall is that sufficient or do I need one on both sides?

Hall of Fame Super Silver

Re: Multiple SSID no DHCP on guest

You would need one at each side, if you want to provide both data and guest. The wireless bridge will also have to be able to tag traffic which most do.

Sent from Cisco Technical Support iPad App

-Scott
*** Please rate helpful posts ***
782
Views
0
Helpful
8
Replies
CreatePlease to create content