07-28-2009 09:35 AM - edited 07-03-2021 05:53 PM
I have created three new SSID that needs to go to all APs (LWAPP). The new SSID were created at the WLC. However, they are not been advertized thru the wireless network.
Did I miss a step?
Thanks
07-28-2009 02:48 PM
Is your SSID enabled?
So in WLANs> your new SSID, verify if Enabled is checked...
Also, is it set for the radios that are up on your APs? In other words, verify in WLANs > Your new SSID that the radio policy matches the radios that are "on" on your APs.
07-28-2009 05:25 PM
Is the SSID enabled?
Is Broadcast SSID enabled?
07-28-2009 06:22 PM
Thanks for the reply. After have submited the post, I went back and check one the WLC to make sure everything was in order.
Apperantly, I forgot to click, under ssid management, one of the check boxes.
Thanks for all your help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide