Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

native and management vlans on Wireless Bridges

I am connection a remote LAN (VLAN 67) via a set of C350 bridges to the main LAN. I have configured a management VLAN 200. All networked managed devices (~80) are on this VLAN. The native VLAN in the trunks is VLAN 1.

I am confused about how to configure the bridge for native and other VLANs. I would like to "manage" the bridges using VLAN 200. Can this be done ?

1 REPLY
Bronze

Re: native and management vlans on Wireless Bridges

I think managing bridges using VLAN 200 in your case may be possible. I hope if you configure native vlan of bridge to 200, then it can solve your problem. For how to configure native vlan in that particular bridges, go through the following doc..

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_guide_chapter09186a008010257c.html#1036150

218
Views
0
Helpful
1
Replies