I am using WLC 5508 v7.6 and configured local client profiling [http and dhcp] in SSID with Web-Auth only. The profiling is configured to have Apple IOS devices mapped to certain VLAN and leaving other devices like Windows-Workstation to a default VLAN mapped to via AP Grouping.
This actually works when I am only using L2 (WPA-PSK) as authentication method. But when using L3 Web auth, we can't get the VLAN mapping works. But the device is properly profiled.
The reason for this is that WebAuth is a layer 3 authentication method in which the devices have to associate and obtain an ip address. You will not be able to set a vlan to a guest user, because they already have an ip address assigned to them. This is the same scenario when using ISE or any other radius. You would need to send a CoA and disassociate the device, know the mac so when it attempts to associate again, the WLC will put them on the correct vlan.... doesn't work this way though.
*****Help out other by using the rating system and marking answered questions as "Answered"*****
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...