Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Native VLAN Help!!!!!

Hello I setup an AP with 3 VLANs VLAN1=native, VLAN2=VoIP, VLAN3=Data. VLAN2and3 are working greate however the native VLAN which the AP resides I can not ping or web browse to the AP. I can use a cross over cable to make a connection. The native VLAN has an SSID with association=0. I want to setup the native VLAN so that it can only be accessed for administration over the copper network. Any help would be great. I am oconnecting to a 2950 which is then connected to a 6509.

Thanks

1 REPLY
Silver

Re: Native VLAN Help!!!!!

You can have only one VLAN without any encryption also try not to associate the Native VLAn with the native SSID.

122
Views
0
Helpful
1
Replies