Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need help with BVI

When I start my router it's giving me an error message and was wondering if someone could help me out.

error reads as:

"Configuration of vLAN subinterfaces and main

interface within the same bridge group is not permitted

Please configure the bridge group on this interface first.

Configuration of vLAN subinterfaces and main

interface within the same bridge group is not permitted

STP: Unable to get the port parameters.

Please configure the bridge group on this interface first.Authorized access only

!

Disconnect IMMEDIATELY if you are not an authorized user!

Username:

Password:

"

  • Getting Started with Wireless
1 REPLY

Re: Need help with BVI

your Dot11Radio 0 Interface is in bridge-group 1, and your Dot11Radior 0.1 interface is also in Bridge-group 1. If you are doing sub interfaces on the radio, each sub interface needs to be in it's own bridge group, and the interface does not.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
1225
Views
5
Helpful
1
Replies