Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need Help with Installing AP 1250

I am installing AP 1250 with wireless client authenticating to radius server running on MS ISA server.   The users are supposed to be authenticating with AD.  So far I have been running into problems and unable to get any user connected via Wireless LAN. 

I would like your feedback if the configuration is good on the AP. Do I need tweak it to work?   The plan is to install one and then install the rest of the 3 more APs in the infrastructure.   I would like to get the one up and running first.  

I would like any suggestion to enhance my configuration and design guidance.   Also need help for ISA configuration.

Config from AP

    !

    hostname cisco1-ap

    !

    aaa new-model

    !

    aaa group server radius rad_eap

     server 10.1.2.25 auth-port 1812 acct-port 1813

    !

    aaa group server radius rad_acct

     server 10.1.2.25 auth-port 1812 acct-port 1813

    !

    aaa group server radius rad_admin

    !

    aaa group server tacacs+ tac_admin

    !

    aaa group server radius rad_pmip

    !

    aaa group server radius dummy

    !

    aaa group server radius rad_mac

    !

    aaa authentication login default local

    aaa authentication login eap_methods group rad_eap

    aaa authentication login mac_methods local

    aaa authorization exec default local

    aaa accounting network acct_methods start-stop group rad_acct

    !        

  

    !

   

    dot11 ssid ABCD123

     authentication open eap eap_methods

     authentication network-eap eap_methods

     authentication key-management wpa

     guest-mode

     infrastructure-ssid optional

    !

    power inline negotiation injector installed

   !

   

    !

    bridge irb

    !

    interface Dot11Radio0

     no ip address

     no ip route-cache

     encryption mode ciphers tkip

     ssid ABCD123

     station-role root

     rts threshold 2312

     no dot11 extension aironet

     bridge-group 1

    bridge-group 1 subscriber-loop-control

     bridge-group 1 block-unknown-source

     no bridge-group 1 source-learning

     no bridge-group 1 unicast-flooding

     bridge-group 1 spanning-disabled

    !

    interface Dot11Radio1

    

    shutdown

    !

    interface FastEthernet0

     no ip address

     no ip route-cache

     speed 100

     full-duplex

     bridge-group 1

     no bridge-group 1 source-learning

     bridge-group 1 spanning-disabled

    !

    ip http server

    ip http authentication aaa

    no ip http secure-server

    ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag

    ip radius source-interface BVI1

    !

    radius-server attribute 32 include-in-access-req format %h

    radius-server host 10.1.2.25 auth-port 1812 acct-port 1813 key 0 XXX-XXX-XXX-X

    radius-server deadtime 5

    radius-server vsa send accounting

    radius-server vsa send authentication

    bridge 1 route ip

    !

    line con 0

    line vty 0 4

    !        

1 REPLY
New Member

Re: Need Help with Installing AP 1250

It is IAS and not ISA server.  I apologies for the confusion it might have caused you. 

805
Views
0
Helpful
1
Replies