Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need Your Help 5508 WLC works unnormally

Dears,

 

 

 

We have 2 WLC 5508, one of them is Active and other on is in Standby,  we have a strange issue, sometimes wireless signal from AP(2602) shows as

AD-HOC on Laptops, there is no error or something WLC shows us, what can be the reason, we using 7.4.100.0 Firmware

 

 

Another issue when i testing High Availiability, i turn off Active, some APs resetting and after 2-3 minutes again register on WLC

 

Is that firmware or what ?

 

Please help

Everyone's tags (1)
2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Purple

7.4.100.0 is NOT a stable

7.4.100.0 is NOT a stable code at all... Highly recommended to move out of it.. go for 7.4.121.0 . Below list few bugs we encounter with this code.

http://mrncciew.com/2013/02/10/day-0-with-wlc-7-4-code/ 

 

HTH

Rasika

**** Pls rate all useful responses ***

Hall of Fame Super Gold

I agree with Rasika.   Either

I agree with Rasika.  

 

Either upgrade to 7.4.121.X or 7.6.130.X.  I don't even want to bother troubleshooting anything with this version of firmware currently being used.

7 REPLIES
New Member

I can provide any info you

I can provide any info you will need
 

VIP Purple

7.4.100.0 is NOT a stable

7.4.100.0 is NOT a stable code at all... Highly recommended to move out of it.. go for 7.4.121.0 . Below list few bugs we encounter with this code.

http://mrncciew.com/2013/02/10/day-0-with-wlc-7-4-code/ 

 

HTH

Rasika

**** Pls rate all useful responses ***

New Member

I will update it and will

I will update it and will tell you the results

New Member

At least 4 days i upgraded

At least 4 days i upgraded WLC, it is working stable at this moment

VIP Purple

That's sounds like "issue is

That's sounds like "issue is fixed". 4 days stability is good indication for the same.

Anyway monitor it for long & let us know if any issues

 

HTH

Rasika

Hall of Fame Super Gold

I agree with Rasika.   Either

I agree with Rasika.  

 

Either upgrade to 7.4.121.X or 7.6.130.X.  I don't even want to bother troubleshooting anything with this version of firmware currently being used.

New Member

Upgraded to 7.100.121.x, now

Upgraded to 7.100.121.x, now it works normal, im monitoring it via logs and debugging

 

 

thank you

99
Views
0
Helpful
7
Replies