Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

NetFlow and WCL5508

What is needed to caputre NetFlow data from a WLC5508?

Is the 5508 NetFlow capable like routers?

 

Thanks - Phil

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

It is not standard Netflow,

It is not standard Netflow, so you need to have customized flow collector that will understand WLC netflow format.

Cisco Prime Assurance, Scrutinizer work as flow collector.(may be few other products too). Below will help you get an idea based on what I have tested sometime back.

http://mrncciew.com/2013/02/13/who-really-support-wlc-netflow/

http://mrncciew.com/2013/02/12/configuring-netflow-on-wlc-7-4/

HTH

Rasika

**** Pls rate all useful responses ****

3 REPLIES
VIP Purple

It is not standard Netflow,

It is not standard Netflow, so you need to have customized flow collector that will understand WLC netflow format.

Cisco Prime Assurance, Scrutinizer work as flow collector.(may be few other products too). Below will help you get an idea based on what I have tested sometime back.

http://mrncciew.com/2013/02/13/who-really-support-wlc-netflow/

http://mrncciew.com/2013/02/12/configuring-netflow-on-wlc-7-4/

HTH

Rasika

**** Pls rate all useful responses ****

New Member

Rasika,Yes, that is exactly

Rasika,

Yes, that is exactly what I'm looking for!  This is the sort of in-depth answer I was hoping for.

Now on to the implementation phase

Phil

VIP Purple

No worries Phil. Glad that

No worries Phil. Glad that helps you...

You can mark this thread as "answered" if you get what you looking for

Rasika

87
Views
10
Helpful
3
Replies
CreatePlease to create content