Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

NME-WLC8-K9 and 3725

Will the NME-WLC8-K9 work on the Cisco 3725? Will there be a problem if there is a L3 switch between the router where the NME-WLC8 is plugged in and the L2 switches where the LAPs are connected?

1 REPLY
Hall of Fame Super Silver

Re: NME-WLC8-K9 and 3725

That will work just fine. The ap's will just need to have connectivity back to the to the wlc. Now it depends on how you stage the lap's to be able to join the wlc.

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a00808e2d27.shtml#backinfo

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080665cdf.shtml#conf

-Scott
*** Please rate helpful posts ***
173
Views
0
Helpful
1
Replies
CreatePlease to create content