Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

No DHCP Service after Web Policy

Hi all,

i have new a wireless installation with a Guest Anchor Controller. For the Guest WLAN everything works fine as long i configure it with WPA PSK but without Layer 3 Web Policy.

When i configure the Layer 3 Web Policy the wireless clients get no DHCP address anymore.

Any idea ?

2 REPLIES
Hall of Fame Super Silver

Re: No DHCP Service after Web Policy

Make sure when you enable web policy you enable it on all foreign and anchor wlc's. There shouldn't be an issue if you can get it to work with another encryption method.

-Scott
*** Please rate helpful posts ***
New Member

Re: No DHCP Service after Web Policy

Thanks, this was one failure.

The second failure was wrong interface for guest vlan on the foreign, what needs to be managent.

Issue solved.

Thanks again

Andreas

149
Views
0
Helpful
2
Replies
CreatePlease to create content