no IP address seen in association table of AP for client static IP address

i.bhatti · ‎08-16-2002

I am running version 11.21 on the AP 340 and 4.25.30/8.2.3 on the 350 client (win 2K).

When looking at the adapter I see the IP address but cannot ping the IP address of the AP ethernet interface.

The client is associated with AP340

When looking at the Association table on the AP I see associated & MAC of client but no IP address.

Does anyone know why?

Regards

Imran

blue.modal · ‎08-21-2002

Bad IP config? You can get an association and authentication even when the client and AP subnet information do not match.

Matthew Wheeler

Chief Wireless Architect

i.bhatti · ‎08-22-2002

The issue was resolved by resetting the AP340s to factory default.

Thanks

Imran