Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

No join response from WLC

Hi ,

WLC-4402  with software 5.0.148.2 ,AP 1131-AG not getting registered with controller.AP not getting Join response from WLC.Anyone please help me to troubleshoot the problem

*Mar  1 00:00:05.635: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed

*Mar  1 00:00:07.229: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0

*Mar  1 00:00:08.804: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1

*Mar  1 00:00:10.951: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up

*Mar  1 00:00:11.996: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up

*Mar  1 00:00:14.437: %SYS-5-RESTART: System restarted --

Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(13d)JA, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.

Compiled Fri 08-Feb-08 17:21 by prod_rel_team

*Mar  1 00:00:14.438: %SNMP-5-COLDSTART: SNMP agent on host AP0025.45b0.365e is undergoing a cold start

*Mar  1 00:00:14.479: %SSH-5-ENABLED: SSH 2.0 has been enabled

*Mar  1 00:00:14.877: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset

*Mar  1 00:00:14.878: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset

*Mar  1 00:00:15.877: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down

*Mar  1 00:00:15.878: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

*Mar  1 00:00:30.404: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY

*Mar  1 00:00:30.895: Logging LWAPP message to 255.255.255.255.

Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)

%DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.255.58, mask 255.255.255.0, hostname AP0025.45b0.365e

%LWAPP-3-CLIENTEVENTLOG: Controller address 192.168.255.5 obtained through DHCP

%LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.

%LWAPP-3-CLIENTEVENTLOG: Did not get any DNS options from DHCP.

%SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated

%CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source

%LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up

%LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up

%LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER

%LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER

%LWAPP-5-CHANGED: LWAPP changed state to JOIN

%LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down

%LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down

%LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down

%LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down

%LWAPP-3-CLIENTERRORLOG: Join Timer: did not recieve join response (controller - MBZWLC1)

%LWAPP-3-CLIENTERRORLOG: Set Transport Address: no more AP manager IP addresses remain

%LWAPP-3-CLIENTERRORLOG: Join Timer: did not recieve join response (controller - MBZWLC1)

%LWAPP-3-CLIENTERRORLOG: Set Transport Address: no more AP manager IP addresses remain

%SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID NOT GET JOIN RESPONSE.

%LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is available.

flashfs[0]: 9 files, 3 directories

flashfs[0]: 0 orphaned files, 0 orphaned directories

flashfs[0]: Total bytes: 15998976

flashfs[0]: Bytes used: 5573120

flashfs[0]: Bytes available: 10425856

flashfs[0]: flashfs fsck took 29 seconds.

Base ethernet MAC Address: 00:25:45:b0:36:5e

Initializing ethernet port 0...

Reset ethernet port 0...

Reset done!

5 REPLIES
New Member

Re: No join response from WLC

Was this AP added to the WLC's AP Policies (SSC or MIC)?

New Member

Re: No join response from WLC

No AP policies.I did basic configuration only

New Member

Re: No join response from WLC

Hi

In AP Log  AP is not sending LWAPP Join-Request .I think WLC is not getting Join Request from AP.I did only basic configuration.This is first Ap i am trying to register with controller.

Below is the debug of lwapp events in controller

Fri May 21 18:51:43 2010: 00:23:eb:1e:15:d0 Received LWAPP DISCOVERY REQUEST from AP 00:23:eb:1e:15:d0 to 00:26:cb:de:5d:c0 on port '1'
Fri May 21 18:51:43 2010: 00:23:eb:1e:15:d0 Successful transmission of LWAPP Discovery Response to AP 00:23:eb:1e:15:d0 on port 1

Hall of Fame Super Gold

Re: No join response from WLC

I'd upgrade the WLC firmware to 6.X.  5.X firmware has alot of bugs and some of them happen to be APs not joining WLC. 

New Member

Re: No join response from WLC

I  have another site which running same software version with AP1131AG without any problems.Anyway I will Upgrade to 6.0 and see problems get solved or not.

619
Views
0
Helpful
5
Replies