Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

no SSID out of the AP

I did a basic controller solution with just one SSID

everything is enabled, Broadcast, Radios, ...

          -> I see no SSID

                    Help please

Everyone's tags (3)
14 REPLIES

no SSID out of the AP

Are your radios up ? What aps are you using? Have they joined the wlc?

You need to provide more info

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

no SSID out of the AP

hi the radios are up

Dot11Radio0 is up, line protocol is up

  Hardware is 802.11N 2.4GHz Radio, address is 3cce.7357.2cb0 (bia 3cce.7357.2cb0)

  MTU 1500 bytes, BW 54000 Kbit/sec, DLY 1000 usec,

     reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  ARP type: ARPA, ARP Timeout 04:00:00

  Last input never, output 00:00:00, output hang never

  Last clearing of "show interface" counters never

  Input queue: 0/4482/0/0 (size/max/drops/flushes); Total output drops: 3

  Queueing strategy: fifo

  Output queue: 0/30 (size/max)

  5 minute input rate 6000 bits/sec, 6 packets/sec

  5 minute output rate 0 bits/sec, 0 packets/sec

     90268 packets input, 9493748 bytes, 0 no buffer

     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

     0 input packets with dribble condition detected

     597 packets output, 45372 bytes, 0 underruns

     0 output errors, 0 collisions, 9 interface resets

     0 unknown protocol drops

     0 babbles, 0 late collision, 0 deferred

     0 lost carrier, 0 no carrier

     0 output buffer failures, 0 output buffers swapped out

Dot11Radio1 is up, line protocol is up

  Hardware is 802.11N 5GHz Radio, address is 3cce.7357.2cb0 (bia 3cce.7357.2cb0)

  MTU 1500 bytes, BW 54000 Kbit/sec, DLY 1000 usec,

     reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  ARP type: ARPA, ARP Timeout 04:00:00

  Last input never, output 00:00:00, output hang never

  Last clearing of "show interface" counters never

  Input queue: 0/4482/0/0 (size/max/drops/flushes); Total output drops: 1

  Queueing strategy: fifo

  Output queue: 0/30 (size/max)

  5 minute input rate 0 bits/sec, 0 packets/sec

  5 minute output rate 0 bits/sec, 0 packets/sec

     124 packets input, 6570 bytes, 0 no buffer

     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

     0 input packets with dribble condition detected

     969 packets output, 73644 bytes, 0 underruns

     0 output errors, 0 collisions, 5 interface resets

     0 unknown protocol drops

     0 babbles, 0 late collision, 0 deferred

     0 lost carrier, 0 no carrier

     0 output buffer failures, 0 output buffers swapped out

GigabitEthernet0 is up, line protocol is up

  Hardware is PowerPC405ex Ethernet, address is f0f7.5579.5cbc (bia f0f7.5579.5cbc)

  Internet address is 192.168.45.10/24

  MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,

     reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA, loopback not set

  Full-duplex, 1000Mb/s, media type is T

  output flow-control is unsupported, input flow-control is unsupported

  ARP type: ARPA, ARP Timeout 04:00:00

  Last input 00:00:00, output 00:00:00, output hang never

  Last clearing of "show interface" counters never

  Input queue: 0/4482/0/0 (size/max/drops/flushes); Total output drops: 0

  Queueing strategy: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 4000 bits/sec, 4 packets/sec

  5 minute output rate 3000 bits/sec, 4 packets/sec

     19459 packets input, 2283184 bytes, 0 no buffer

     Received 6284 broadcasts, 0 runts, 0 giants, 0 throttles

     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

     0 watchdog, 0 multicast, 0 pause input

     0 input packets with dribble condition detected

     13817 packets output, 2109895 bytes, 0 underruns

     0 output errors, 0 collisions, 3 interface resets

     0 unknown protocol drops

     0 babbles, 0 late collision, 0 deferred

     0 lost carrier, 0 no carrier, 0 pause output

     0 output buffer failures, 0 output buffers swapped out

New Member

no SSID out of the AP

Hall of Fame Super Red

Re: no SSID out of the AP

Hi there,

Did you use;

Step 6 

guest-mode

(Optional) Designate the SSID as your access point guest-mode SSID. The  access point includes the SSID in its beacon and allows associations  from client devices that do not specify an SSID.

From;

http://www.cisco.com/en/US/docs/wireless/access_point/12.4_10b_JA/configuration/guide/scg12410b-chap7-mbssid.html#wp1017196

Cheers!

Rob

EDIT: hey George ...long time my friend Hope all is well with you! +5

"Show a little faith, there's magic in the night" - Springsteen

Re: no SSID out of the AP

Rob,

Hello! Im well .. Keeping my head above water. And you ?

I dont think its guest-mode, thats for autonomous aps, the question referenced controller. But who knows its a pretty open question with little detail.

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
Hall of Fame Super Red

no SSID out of the AP

Hi George,

Life is great...but obviously I can't read very well anymore My BAD!!

Cheers!

Rob

"Show a little faith, there's magic in the night" - Springsteen

New Member

no SSID out of the AP

i don't use guest mode

New Member

no SSID out of the AP

Have you got 'Broadcast SSID' ticked on the WLAN settings? Go to WLAN tab, then click on your SSID and ensure the setting is ticked.

New Member

no SSID out of the AP

yes broadcast is enabled

no SSID out of the AP

Another common problem if everything else is good is a security mis config. What security are you using. And what supplicant are you testing with ..

thanks

__________________________________________________________________________________________ "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin ___________________________________________________________
New Member

no SSID out of the AP

i tried none, wep, wpa2/psk

     ---> nothing

I see no ssid even before security is started, Network stumbler shows nothing

no SSID out of the AP

What type of AP is this? 

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

no SSID out of the AP

thanks too all found with the level 2 eng the problem

i used ssid 41 instead of 1-16

     ---> i mean its clear that only 16 ssid are allowed but you can select id 1-5xx !!!!!!!!!!

Re: no SSID out of the AP

If you use an id above 16 you have to put that WLAN in an AP group and put the AP in the group as well.

Sent from Cisco Technical Support iPhone App

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
442
Views
31
Helpful
14
Replies