Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Not able to enable new 11G module

after i upgrade my IOS to 123-8.

i plug-in a new 11g module into the AP1210.

the status shows hardware - down.

software status shows - disabled.

how do i enable the software status.

interface Dot11Radio0

no ip address

no ip route-cache

speed basic-1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 24.0 36.0 48.0 54.0

channel 2462

station-role root

bridge-group 1

bridge-group 1 subscriber-loop-control

bridge-group 1 block-unknown-source

no bridge-group 1 source-learning

no bridge-group 1 unicast-flooding

bridge-group 1 spanning-disabled

1 REPLY
Community Member

Re: Not able to enable new 11G module

solved my own prob.

did not assigned any ssid to my 11G radio.

163
Views
0
Helpful
1
Replies
CreatePlease to create content