Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Not enough nvram memory in AP

I encounter one issue in AP. Not sure why the directory of nvram does not have any file and cannot write memory to the AP.

AP#wr 

%No memory available
%No memory availablestartup-config file open failed (Not enough space)


AP#dir nvram:

%No memory available
Directory of nvram:/


%No memory available
%Error calling getdents for nvram:/ (Unknown error 89)

5 REPLIES
Hall of Fame Super Gold

Re: Not enough nvram memory in AP

Errr ... It should be "dir flash:".

New Member

Re: Not enough nvram memory in AP

What does 'show startup' show?

/André

New Member

Re: Not enough nvram memory in AP

There is configuration in the startup. However, once i reload the AP the configuration will be lost.

Not sure why cannot save the configuration in the AP

Hall of Fame Super Gold

Re: Not enough nvram memory in AP

What is the output to the command "dir flash:"?

New Member

Re: Not enough nvram memory in AP

The routers NVRAM might be faulty and if so you need an RMA and that is a issue that must be solved through TAC.

You can try the following first. Just press enter to confirm:

ROUTER#write erase

Erasing the nvram filesystem will remove all configuration files! Continue? [confirm]

[OK]

Erase of nvram: complete

ROUTER#write memory

Building configuration...

[OK]

ROUTER#

Above you see how the router should respond.

/André

646
Views
0
Helpful
5
Replies