Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

OEAP DTLS Problem

Hello ;

I have a 2504 Controller running software 7.2.110.0 , which came with 7.0 version then i upgraded and installed DTLS license.

also i have an OEAP 600 running 7.2.103.0

I tried to setup a connection via Internet , everything seems fine but DTLS.

Here is the output ;

Choosing AP Mgr with index 0, IP = 10.1.1.110, load = 2..

*Jul 25 17:09:14.869: Synchronizing time with AC time.

*Jul 25 17:09:15.000: CAPWAP State: DTLS Setup.

*Jul 25 17:10:14.999: Wait DTLS timer has expired

*Jul 25 17:10:14.999: Dtls session establishment failed

*Jul 25 17:10:15.000: CAPWAP State: DTLS Teardown.

*Jul 25 17:10:19.998: DTLS session cleanup completed. Restarting capwap state machine.

*Jul 25 17:10:19.998: Previous CAPWAP state was DTLS Setup,numOfCapwapDiscoveryResp = 1.

*Jul 25 17:10:19.999:

Lost connection to the controller, going to re-start evora...

Any ideas to solve this problem ?

2 REPLIES
Hall of Fame Super Silver

Re: OEAP DTLS Problem

So you have udp 5247 open to the wlc?

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: OEAP DTLS Problem

You do need both udp 5246 & 5247 open.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
698
Views
0
Helpful
2
Replies
CreatePlease to create content