cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
245
Views
5
Helpful
2
Replies

Office extend option not seen under flexconnect

ammahend
VIP
VIP

I have a 2602i , registered on a virtual controller with 7.6.130.0, running in flexconnect mode, but I dont see office extend option under flexconnect, any comments ???

-hope this helps-
1 Accepted Solution

Accepted Solutions

Stephen Rodriguez
Cisco Employee
Cisco Employee

Do you have a DTLS license loaded on your WLC?

 

HTH,

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

View solution in original post

2 Replies 2

Stephen Rodriguez
Cisco Employee
Cisco Employee

Do you have a DTLS license loaded on your WLC?

 

HTH,

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

well I could not find an evaluation dtls lic for virtual controller, so I installed a 7500 controller dtls lic and it shows in use and data encryption is enable on AP, still i don't see office extend option.

I am not sure its because I am using a 7500 dtls licence.

 >show license summary

License Store: Primary License Storage
StoreIndex:  0  Feature: data_encryption                   Version: 1.0
        License Type: Permanent
        License State: Active, In Use
        License Count: Non-Counted
        License Priority: Medium

 

 

-hope this helps-
Review Cisco Networking products for a $25 gift card