I am configuring a 1252 in autonomous mode and that's the only AP in the network.
A very strange behavior is observed.
Although many clients can associate to this AP with no problem, only the first two associated devices can connect through this AP and access devices on the wired network. For 3rd associated device and above, they can only connect to and ping to AP but nothing beyond AP. In Windows the wireless icon would display "limited access" with an exclamation mark.
DHCP works fine though for all devices, and they can acquire the IP from DHCP server on a different segment.
I don't have too much experience with wireless so I am totally lost with no direction.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...