Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Password recovery if AP is configured with "no boot mode-button "

Hi All ,

Is there any password recovery procdure available for the AP that is configured with

no boot mode-button . Or should we need to contact only TAC?

Thanks,

Regards,

Vijay

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Password recovery if AP is configured with "no boot mode-bu

You need to contact TAC if you cannot login to the unit.

https://supportforums.cisco.com/docs/DOC-16219

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
3 REPLIES
VIP Purple

Password recovery if AP is configured with "no boot mode-button

Hi Vijay,

Please check if these method can Help you:

Web Browser Method

Web browser method

Follow  these steps to delete the current configuration and return all wireless  device settings to the factory defaults using the web browser  interface:

Step  1          Open your Internet browser. You must use Microsoft Internet  Explorer (version 5.x or later) or Netscape Navigator (version 4.x).

Step  2          Enter the wireless device IP address in the browser address  line and press Enter. An Enter Network Password screen appears.

Step 3          Enter your username in the User Name field.

Step 4          Enter the wireless device password in the Password field and press Enter. The Summary Status page appears.

Step 5          Click System Software and the System Software screen appears.

Step 6          Click System Configuration and the System Configuration screen appears.

Step 7          Click the Reset to Defaults or Reset to Defaults (Except IP) button.

Note

Select Reset to Defaults (Except IP) if you want to retain a static IP address.

Step 8          Click Restart. The system reboots.

Step  9          After the wireless device reboots, you must reconfigure the  wireless device by using the Web-browser interface or the CLI. The  default username and password are Cisco, which is case-sensitive.

for more

https://supportforums.cisco.com/docs/DOC-4532

Regards

VIP Purple

Password recovery if AP is configured with "no boot mode-button

Also check this document:

https://supportforums.cisco.com/docs/DOC-5456

Regards

Dont forget to rate helpful posts

Hall of Fame Super Silver

Re: Password recovery if AP is configured with "no boot mode-bu

You need to contact TAC if you cannot login to the unit.

https://supportforums.cisco.com/docs/DOC-16219

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
152
Views
3
Helpful
3
Replies
CreatePlease login to create content