Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Member

PCM350 card DOS installing problem

I have installed a PCM350 card into my NEC

laptop running MS-DOS operating system v.6.22.

When the driver starts up, shows the following

message:

Card services not present, trying 82365.

Driver resources ---> IO Ports: 0300-033f

IRQ: 0B Memory: D000

Radio configuration failed

Invalid parameter for IRQ

CSCPKT failed to load

I have tryed to start up the driver with card

services installed, but the response is the

same (of course I didn't get the 82365 message)

I have also tried to start up the driver with

all allowed vectors numbers (from 0x60 to 0x7F)

but the result is the same.

I think I have problems during the loading of

the driver, but it seems the I/O and IRQ

resources are appropriate.

Could you help me ?

Best Regards

/Alessandro

1 REPLY
Bronze

Re: PCM350 card DOS installing problem

Try to reload the driver again using the following guideline.

http://www.cisco.com/warp/public/102/wlan/DOS-Aironet.html

179
Views
0
Helpful
1
Replies
CreatePlease to create content