Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PCM350 card DOS installing problem

I have installed a PCM350 card into my NEC

laptop running MS-DOS operating system v.6.22.

When the driver starts up, shows the following

message:

Card services not present, trying 82365.

Driver resources ---> IO Ports: 0300-033f

IRQ: 0B Memory: D000

Radio configuration failed

Invalid parameter for IRQ

CSCPKT failed to load

I have tryed to start up the driver with card

services installed, but the response is the

same (of course I didn't get the 82365 message)

I have also tried to start up the driver with

all allowed vectors numbers (from 0x60 to 0x7F)

but the result is the same.

I think I have problems during the loading of

the driver, but it seems the I/O and IRQ

resources are appropriate.

Could you help me ?

Best Regards

/Alessandro

1 REPLY
Bronze

Re: PCM350 card DOS installing problem

Try to reload the driver again using the following guideline.

http://www.cisco.com/warp/public/102/wlan/DOS-Aironet.html

160
Views
0
Helpful
1
Replies