The Cisco 1200 AP is not 802.3af compliant and will not work with a pure 802.3af switches. You should be able to add a PDPS800 which will receive power from an 802.3af switch and output 48VDC plus data to the 1200.The PDPS800 will need to be located near the 1200 AP. See URL below
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...