Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Point to Multipoint deployment??

Hi everyone,

I've been asked to implement a point to multipoint solution which I had never done before.

My question is how many non roots can the root support?

I am planning to use 1310 bride as root with a AIR-ANT24120 and non roots AP1242 with AIR-ANT2410Y-R they wont be longer than 1 km.

I'd appreciate your comments, suggestions and design guides if there are any.

Thank you!

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Point to Multipoint deployment??

Here is the answer to your question:

Point-to-Multipoint Bridging

In a point-to-multipoint configuration, two or more non-root bridges associate to a root bridge. Up to 17 non-root bridges can associate to a root bridge, but the non-root bridges must share the available bandwidth.

http://www.cisco.com/en/US/docs/wireless/access_point/1300/12.3_7_JA/configuration/guide/b37ovrv.html#wp1034650

-Scott
*** Please rate helpful posts ***
1 REPLY
Hall of Fame Super Silver

Point to Multipoint deployment??

Here is the answer to your question:

Point-to-Multipoint Bridging

In a point-to-multipoint configuration, two or more non-root bridges associate to a root bridge. Up to 17 non-root bridges can associate to a root bridge, but the non-root bridges must share the available bandwidth.

http://www.cisco.com/en/US/docs/wireless/access_point/1300/12.3_7_JA/configuration/guide/b37ovrv.html#wp1034650

-Scott
*** Please rate helpful posts ***
273
Views
0
Helpful
1
Replies
CreatePlease to create content