i want to connect two sites by wireless network , how can i connect them and what the best device i have to use , the distance between two sites is 7km , its a flat area , there is no brorders between two sites
I would recommend using , Cisco Air-350 Series bridges along with approx 13.5 dbi directional antenna to make a stable point to point link, the antennas could be used from a good local vendors since that will enable a host of choices at comptetitive price.
Just remember if you do use 3rd party anttenna's that are NOT certified to be used with Cisco Bridges then under part 9 of the FCC regulations it is up to the installer to certify that the system is compliant as you have modifed the system that Cisco had certifed
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...