Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Point to point wireless brdiges

point to point wireless bridge failed after upgrading WLC from 4400 with 7.0 IOS to 2504 with 7.4.100 IOS. The AP's keeps disassociating and associating to WLC.

The connected switch to the root AP is reporting BPDU vlan mismatch.

Enabling the BPDU on the interface on the switch will keep the AP's associated but still only one vlan is passed.

I was able to do this with older 4400 7.0 IOS with multiple vlans passed but not with new hardware and software.

Thanks

1 REPLY

Refer : https://supportforums

Refer : https://supportforums.cisco.com/discussion/10832776/point-point-bridge-configuration

 

55
Views
0
Helpful
1
Replies
CreatePlease to create content