04-21-2008 01:29 AM - edited 07-03-2021 03:45 PM
Can I use Cisco AP 1240 for a point to point connectivity of 2 sites having a distance of approx 2 km
04-21-2008 03:07 AM
mansoor9349, yes you can use the 1240 AP but I would suggest a high gain external patch antenna. I think at that distance your 802.11b interface will be available maybe even your 802.11a provided you have line of sight.
04-21-2008 03:14 AM
Do u suggest any antenna for that
04-22-2008 01:46 AM
I would suggest "AIR-ANT24120" antenna for 802.11G.
-> Sushil
05-02-2008 04:52 AM
Hi
The following Antenna suitable for your Requirement
AIR-ANT2410Y-R - 2.4 GHz,10 dBi Yagi with RP-TNC Connector
regs
S.Mohana sundaram
05-02-2008 06:09 AM
If it is outdoor use the following
AIR-BR1310G-A-K9 Aironet 1310 Outdoor AP/Br w/ Integrated Antenna, FCC Config
The integrated antenna will be sufficient for 2 KM Range
Rgds
Ganesan Velusamy
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: