08-27-2012 02:42 PM - edited 07-03-2021 10:34 PM
Hello,
Have two 1242's that I believe I configured properly as they are passing traffic and I have an IP phone working. The setup is as follows:
PC/Phone--->3750 Switch ---->non-root ap ////////\\\\\\\\\\\ root ap <-------3560 switch <-------------Main Network
Has a data vlan (VLAN 10) and a voice vlan (VLAN 20)
Sub interfaces are dot110.10 and dot110.20 along with fastethernet 0.10 and 0.20 respectively. I have two static IP's that belong to the data vlan's configured on the virtual interface for each AP.
The issue I am having is you can see the SSID. I will ONLY have hard wired PC's and Phones connected to the 3750 switch. No wireless clients at all. Is there a way to stop the SSID broadcasts? I can insert the configs if you would like.
Thanks
Gene
Solved! Go to Solution.
08-27-2012 06:20 PM
Leo,
I think Gene wnats to know how to not broadcast the SSID
So just issue: no guest-mode
08-27-2012 03:05 PM
dot11 ssid YOUR_SSID
mbssid guest-mode
interface Dot11Radio0
mbssid
interface Dot11Radio1
mbssid
08-27-2012 06:20 PM
Leo,
I think Gene wnats to know how to not broadcast the SSID
So just issue: no guest-mode
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide