cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
524
Views
0
Helpful
2
Replies

Point to Point with VLANs on 1242 only for wired how to hide SSID

gene.uhl
Level 1
Level 1

Hello,

Have two 1242's that I believe I configured properly as they are passing traffic and I have an IP phone working.   The setup is as follows:

PC/Phone--->3750 Switch ---->non-root ap  ////////\\\\\\\\\\\ root ap <-------3560 switch <-------------Main Network

Has a data vlan (VLAN 10) and a voice vlan (VLAN 20)

Sub interfaces are dot110.10 and dot110.20 along with fastethernet 0.10  and 0.20 respectively.   I have two static IP's that belong to the data vlan's configured on the virtual interface for each AP.

The issue I am having is you can see the SSID.  I will ONLY have hard wired PC's and Phones connected to the 3750 switch.  No wireless clients at all.  Is there a way to stop the SSID broadcasts?  I can insert the configs if you would like.

Thanks

Gene

1 Accepted Solution

Accepted Solutions

Leo,

I think Gene wnats to know how to not broadcast the SSID

So just issue: no guest-mode

-Scott
*** Please rate helpful posts ***

View solution in original post

2 Replies 2

Leo Laohoo
Hall of Fame
Hall of Fame

dot11 ssid YOUR_SSID

mbssid guest-mode

interface Dot11Radio0

mbssid

interface Dot11Radio1

mbssid

Leo,

I think Gene wnats to know how to not broadcast the SSID

So just issue: no guest-mode

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: