Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Port Channel

Hi all,

        Got a query

I have got following command configured under two interfaces connected to WLC distribution ports

gi1/2

qos vlan-based

gi1/3

qos vlan-based

I have a port-channel configured for both gi1/2 and gi1/3

Do I need to configure qos vlan-based under port-channel as well?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Port Channel

Typically you just need to define QoS on the physical port and not the port channel.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
1 REPLY
Hall of Fame Super Silver

Port Channel

Typically you just need to define QoS on the physical port and not the port channel.

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****

-Scott
*** Please rate helpful posts ***
85
Views
0
Helpful
1
Replies
CreatePlease to create content