Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.
Let's say I have 3 APs, all connected to a WLC 5508
Each AP has a computer that is connected to it, Computer A, B and C, all on the same Vlan with same SSID
Is it possible to configure so
A and B can not talk to each other but both can talk to C ?
Something like "protected port" feature in the switch world.
Go to Solution.
You can block peer 2 peer communication between wireless devices on the same SSID.
That is not possible, you either allow all devices to communicate or you can block communication to each device.
Can you elaborate this further ?
or you can block communication to each device.
Does it mean you can block communication between A, B and C. But they all can still talk to D, which is a device on wire network ?
Im looking for a solution for a WiFi network for our guests, where they dont need to talk to each other, and all need to talk to a wire internet gateway/router only.
If you want to block guest SSID users from talking to each other then it's possible. As Scott has pointed out, it's called "P2P Blocking Action".
I do NOT recommend having guest and corporate share the same SSID. I don't think it's best practice.