Those are transmit power levels and is independent of each radio. So if on the 5ghz you have it set to 200mW or 23dbm, then what is your clients transmitting on? Might just be 100mW max. You should always try to match the AP transmit power with the weakest client.
Sent from Cisco Technical Support iPhone App
*****Help out other by using the rating system and marking answered questions as "Answered"*****
We are moving! Please use WLCCA Forum for updates and discussions
[toc:faq] Wireless LAN Controller (WLC) Config Analyzer Download Click
here to Download To request access, send an e-mail to
firstname.lastname@example.org. Please include your Cisco.com userna...
[toc:faq] IntroductionHere is the step by step process that we have to
take care of while converting LWAPP to IOS and then vice versa..LWAPP to
IOSThe hardware used = 1141 AP (make sure we are using the right
[toc:faq] Introduction AnyConnect Secure Mobility Client 3.0: Network
Access Manager & Profile Editor on Windows Summary Use the Cisco
AnyConnect Network Access Manager Profile Editor to build custom
profiles for the AnyConnect Secure Mobility Client. App...