Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Problem: 1100 acting in WGB mode

Hi hope someone can help

I have 2 aironet 1100 ap's, 1 in one building and 1 in the other.

The first ap is configured to work as a Work Group Bridge, it is connected to a switch along with some other wired PCs.

The second ap is configured as a normal Access Point, and is connected to my wired LAN.

Problem: the WGB does not associate to the Access Point, hence Building 1 has no connection to my wired LAN.

I have followed Cisco documentation on setting this up and am obviously missing something. Please Help!

1 REPLY
Hall of Fame Super Red

Re: Problem: 1100 acting in WGB mode

Hi Richard,

There are some good notes in this doc;

Access Point as a Workgroup Bridge Configuration Example

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml

Hope this helps!

Rob

192
Views
0
Helpful
1
Replies
CreatePlease to create content