Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Problem NCS 1.4 AVC problem - no data available

Hello,
I have problems with the configuration of the AVC with NCS.
I've enabled the functionality AVC on WLC software version 7.5 HA with no problems.
I visualize correctly the statistics.
I enabled netflow exporter to the Cisco NCS.
The NCS does not display any data.
NCS Version 1.4
NCS license assurance
I followed this manual

http://www.cisco.com/en/US/docs/wireless/controller/technotes/7.5/AVC_dg7point5.pdf

Have you any suggestions?
Many thanks

rpargal

Everyone's tags (2)
7 REPLIES

Problem NCS 1.4 AVC problem - no data available

Humm,  Prime 2.0 requires seperate licensing for support of Netflow/AVC.  I don't know about NCS..

VIP Purple

Problem NCS 1.4 AVC problem - no data available

Here is a CiscoLive presentation on this topic, you will find some valuable infromation from it.

BRKNMS-1040: Managing AVC with Cisco Prime Infrastructure 2.0

HTH

Rasika

**** Pls rate all useful responses ****

New Member

Problem NCS 1.4 AVC problem - no data available

Thanks Rasika,

the link it's very interesting.

I opened a Cisco TAC for investigate.

Likely problem is a corrupt  file Xml in the software cisco prime ncs, caused of  procedure  upgrade release from 1.2 to 1.4

I await  news from cisco TAC.

Many thanks.

rpargal

Cisco Employee

Problem NCS 1.4 AVC problem - no data available

Roberto,

Yes, a tac case is the way to go on this. Infact am investigating this issue as well.

If you can just attch the screenshots from Administration>Data Sources >Device data sources

Detail dashboards >>Application

Also, change looging to Trace, Admin>Logging>Message: Trace>Save

Pull the logs after 15 minutes.

We are interested in,

ifm_da, da_daemon.0 and sam_daemon.0

Thanks,

Sahil

New Member

Problem NCS 1.4 AVC problem - no data available

Sahil,

Cisco TAC has resolved the issue.

Certificate problem tomcat.

evidence log problem:

86150: loopback: Dec 23 2013 06:44:00.517 +0100: %IFM-3-WITH_ERROR: %[ch=com.cisco.ifm.sam][mid=202]: Thread Id : [260] : SAM_COLLECTION_ERROR: [RESTDynamicInvocationProxy:Exception:javax.ws.rs.WebApplicationException: org.apache.cxf.interceptor.Fault: Could not send Message

To clean this up, you will need to delete tomcat cert. So the sequence of commands you need to run on admin shell is this.

# ncs stop

# ncs key deletecacert tomcat

# ncs start

Now work fine.

Thanks to all.

rpargal

VIP Purple

Problem NCS 1.4 AVC problem - no data available

Thanks for update this with resolution..+5

Rasika

Cisco Employee

Problem NCS 1.4 AVC problem - no data available

Great.. i think i know who worked your case, didnt know that was yours though..

Happy that we have a resolution now.

Cheers..

620
Views
5
Helpful
7
Replies