I have a cisco access point ( model : AIR-LAP-1242AG-T-K9). I want to know how can I access it through GUI. The IOS version is 12.3(7)JX . Is this version OK. What is the difference between LWAPP & Autonomous mode. What may b d IP adress of the access point.
You have an Lightweight access point the LAP in the part number is the clue. there is no GUI access to this version, you need a 2600 or 4400 controler to use this AP. this AP can also be loaded with Autonomus mode software there are detailed papers on the Cisco web site explaining how to convert the 1242 from Light weight to autonomus and back. an autonomous AP can operate independantly and is managed by the GUI or CLI. the light weight AP configuration is limited to the IP configuration and setting the IP address of the controller, this cna be done using Option 43 along with DHCP.
i have 1 more query. When I connect that AP directly 2 d LAN its not resolving ip from DHCP server.Can u tell me whether DHCP is by default enabled in AP or it has to b enabled if yes then whats the command for that
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...