I am doing a migration from my wireless network in the old network in the PC MacBookPro I can see shared files on the network. But when I connect to the SSID configured on the WLC and I can not see shared files on the network. I have no ACL configured on the SSID.
Bonjour is a non-routabe multicast based service. A trick I use sometimes is to configure the WLAN to be in hreap mode if the ap is located locally to the target bonjour device.if your running in local mode, make sure they are on the same vlan and global multicast is enabled.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...