Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Problem with 3850 stack switch and wireless services

Strange issue, not sure if anybody has seen this before.

A new pair of 3850's in a stack.

IOS XE 3.3.3SE, IP Services.

AP's on switch 1and2 register ok.

AP's on switch 1 advertise WLANs and service clients.

AP's on switch 2 advertise WLANs but do not service clients.

Checking the license right-to-use usage, only slot1(switch1) seems to have AP licences!

Any guidance appreciated and rated!

 

  • Getting Started with Wireless
Everyone's tags (1)
2 REPLIES
Cisco Employee

check your WLC config and

check your WLC config and look for VLAN tagging. may be you are tagging the data plane and not un tagging it on switch. also check on configuring the interface mode.

 

best wishes,

Mohit

New Member

Thanks Mohit, could you

Thanks Mohit, could you explain in a config?

 

These AP's are connected to a pair of stacked 3850's, and are all in the same access vlan.

 

Regards, Ash.

63
Views
0
Helpful
2
Replies
This widget could not be displayed.