I got myself an 861W and had been fighting with the configuration for a while. Now I got the configuration so far, that LAN Connectivity is working, WLAN is working.
I can connect an WLAN Client to the AP and reach the IPs of the AP and Router VLANs.
But now I cannot reach the BVI Management Interface anymore vom LAN. In some earlier configuration step I was able to reach it. Then I changed something according so some Community posts to get the Wireless running and now that does not work anymore.
I don´t which configuration change caused that.
Also I cannot reach my Notebook (192.168.45.100) from the AP to save the config via TFTP.
Can anyone please help.. ?Any tips or optimization hints are more than welcome.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...