05-21-2014 07:34 PM - edited 07-05-2021 12:53 AM
Hello experts,
I have problem when I want to upgrade and setting my Access Point.
I can't change the Ip address of my AP to access it from web.
Sometimes my computer got bluescreen when I connect with USB serial / console cable.
Help how to change my AP from LWAPP to Autonomous AP and what IOS do I use to this AP.
05-21-2014 08:22 PM
Read and follow this procedure instead: Using a TFTP Server to Return to a Previous Release
05-21-2014 08:51 PM
I have read that and change the file name with c1130-k9w7-tar.default but AP cannot find that file from TFTP.
05-21-2014 10:01 PM
but AP cannot find that file from TFTP.
Can you tell me if the file is located in your default TFTP folder?
05-22-2014 04:24 AM
yes, i set the file located in default TFTP
05-22-2014 05:21 AM
Ok, do the entire process again. But this time, copy-and-paste the entire process. I want to see what you are doing and where it's failing.
05-22-2014 08:37 AM
05-22-2014 07:28 PM
It's really hard to point out to you where the problem is because you are posting screenshots.
When you released the button after 29 seconds, the AP automatically assigns itself a 10.0.0.1 IP address (as per instruction).
Two lines later, the AP tries to search for the file. But look at the line after that. It's a "connection timeout". This basically means the AP could not contact your TFTP server.
Maybe you need to check if Windows FW is enabled.
05-22-2014 10:05 PM
my firewall was enabled, but ap cannot connect to tftp
05-21-2014 10:54 PM
HI Dani,
Check these post, It may helps.
http://rscciew.wordpress.com/2014/05/07/access-point-conversion-lap-to-aap-and-vice-versa/
or
http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/
If still getting problem then change the computer or laptop and try with that.
Regards
Dont forget to rate helpful posts
05-29-2014 12:45 PM
The problem may be, the AP could not contact your TFTP server.
Please check if Windows FW is enabled.
05-29-2014 08:27 PM
problem solved. extension file must be *.default
changing name for the file not running if the type file not change.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide