Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problems with 2602i AP not joining WLC

Hi!

I am having a problem where my AP wont join the WLC.

I have solved this problem before by telling the access point where the AP is located. But i cannot remember how the command was.. Anyone have any idea?

/Lajja

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Problems with 2602i AP not joining WLC

the command is capwap ap controller IP address

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
5 REPLIES
Hall of Fame Super Silver

Re: Problems with 2602i AP not joining WLC

the command is capwap ap controller IP address

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
New Member

Problems with 2602i AP not joining WLC

Thank you!

Hall of Fame Super Silver

Re: Problems with 2602i AP not joining WLC

Make sure the time is set properly on the WLC and the country code for the AP is defined in the WLC. You can also place the ap on the same subnet as the WLC manager and have the ap join the WLC. Then after it joins you can move it to another vlan.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Hall of Fame Super Silver

Re: Problems with 2602i AP not joining WLC

Another command is: test capwap controller IP

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Cisco Employee

Re: Problems with 2602i AP not joining WLC

135
Views
0
Helpful
5
Replies
CreatePlease login to create content