If you have one AP as a "repeater" and other is "root", only that way two AP can associate togather..But the eth port will be disabled of the AP acting as a "Repeater". Since the eth port is disabled, the wired LAN cleints can't get access.. Only wireless clients can associate with repeater AP..
So to link those AP's wired LAN togather, you need a Wireless Bridge..
A Bridge can accept the associations from AP's and from wireless clients.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...