Welcome to Cisco Support Community. We would love to have your feedback.
For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.
I have connection problems with W8 and wifi:
some w8 clients after a random connection time start disconnecting, we have to dinsable/enable wireless nic to restore connection
some w8 clients connects with modulation between 5,5 and 11 Mbps and often loose connection with APs.
I followed cisco guide lines for w8 connection (disabled MFP protection) and updated WLC IOS to 7.0.240.
I have four 4400 WLCs and one 5500 WLC in my network.
My laptops are from different vendor and we installed the latest nic firmware.
Do you have any idea?
You say some W8? So some work and some doesn't? Have you looked at the drivers? Do they have issues on an open SSID?
Thanks, Scott Help out other by using the rating system and marking answered questions as "Answered"
I intended some have the first problem, other have the second problem.
drivers are the latest
i have to check with an open ssid, do you mean testing them into a open SSID without any security?
Yes... no security... this can determine if maybe its a security setting.
I created a WLAN without any security set.
I can confirm that in the free wlan there are no problems with W8.
What can i do with protected WLAN?
I have issues both in WPA-PSK and in WPA+RADIUS
i have a similar problem with w8, you should read this information
i did the upgrade and it seems works
i hope this help you
I think the link below might help to solve your query:-