I am trying to connect my central office with remote offices. I set Cisco AP 350 in my central office and Cisco WGB 350 in one remote station for testing only. Those two devices can associate and AP recognize AP as Repeater. But I am having troubles with ping. I some cases I cant ping WGB from Central Office WS or WS on other subnet etc. Can someone explait how to set my AP (WGB). What gateway they should use. Do I need to add some routes on AP (WGB) ?
My Central Office has Cisco 1720 and AP is connected to it on Ethernet port. Remote Offices has Cisco Routers different series with Ethernet port as well.
You connect two LANs with wireless. For this situation you should use two wireless bridges BR352. A Workroup bridge only supports eight stations via a hub. If in the remote office there are more stations including the router this will result in problems like some stations are temporarly not reachable. If you want more information please send me an email.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...