Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Pulling DHCP from location server

Hello all,

I have roughly 26 locations on different subnet and each location has a DHCP server that I would like to use.

The WLC is broadcasting two ssid's (internal and guest). I need for the wifi clients to pull there ip addy's  from the location dhcp severs. Is this possible considering I only have two ssids mapped to two interfaces? Each location has it's on DHCP server that I would like to use. Thanks!

2 REPLIES

Pulling DHCP from location server

For that to work, you would need to configure the remote AP for HREAP.  With HREAP Local Switching, the DHCP request is bridged to the wire, and will pull DHCP from whichever VLAN scope you have configured.  Below is a link to the Design and Deployment guide.

http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080736123.shtml

HTH,

Steve

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
New Member

Pulling DHCP from location server

Stephen thanks for your reply and I will make the changes tonight. I will post back to the forum with my results. Thanks!!!

259
Views
5
Helpful
2
Replies
CreatePlease login to create content