Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Question about Mac filtering / interface change

Hi Everyone,

     We have an SSID that currently uses mac filtering on a 4402 WLC. If we change the SSID to use a new VLAN / Interface, do we have to re-enter the mac addresses to get them to apply to the new interface? Or will the controller software be smart enough to apply the mac list to the new vlan?

 

Thanks,

Craig

3 REPLIES

It depends whether your MAC

It depends whether your MAC Filtering list is set to All Interfaces or whether you have manually selected it.

Look under Security > MAC Filtering, you will see your list of MAC addresses.

If you have selected the specific interface per client then you may need to recreate the list but if you have left it on any interface then you probably won't.

 

Gold

It depends on which interface

Bronze

It depends which interface

It depends which interface did you configure it to in the first place.

31
Views
0
Helpful
3
Replies