Does anyone know if there is a way to automatically enable/disable either the radios or the authentication for an ssid on a wlc? I'd want to disable at night and re-enable in the morning based on a time schedule.
Just to add to George's post... seems like this come up once a month:) If your doing 802.1x, you can also set a time for authentication, but the radios will still be on. If you have switches that support energy-wise, you can shut the port off and on also at a certain time.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...