I have a Cisco 1231 WAP, with a vlan that uses radius, and a guest vlan that just uses a wep key. I recently purchased a second 1231, and configured it as a repeater. On the guest vlan, and I can connect to the repeater, and get to all resources on the guest vlan. However, I cannont connect to the radius vlan. I configured the radius server information on the wap, and configured the repeater IP on the radius server, and it looks like the repeater wap is not talking to the radius server. Is the configuration for radius diffferent for a repeater? Will it even work, with a microsoft radius server?
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...