07-22-2013 01:33 AM - edited 07-04-2021 12:28 AM
Hello all,
Can anyone guide me how to rate/bandwidth limit for the Guest WLAN (towards internet) in Cisco 5508 (7.4.100.60) ..?
Any brief document available for this..?
Solved! Go to Solution.
07-22-2013 06:44 AM
Nope... It's a policy map that is used in the wired side.
Sent from Cisco Technical Support iPhone App
07-22-2013 01:39 AM
Hello,
Here is one cisco doc that might help you out with rate limiting with 5508:
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bd3900.shtml
07-22-2013 01:57 AM
Thanks for sharing the link.
What will be the impact if we do it on the Guest wlan..?
Any best practice to be followed..?
07-22-2013 06:32 AM
Any one can suggest me here..?
07-22-2013 06:33 AM
Try this
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080baf502.shtml
Sent from Cisco Technical Support iPhone App
07-22-2013 06:39 AM
Thanks for your reply Scott..
This is per user based and that too we have to define policy on the switch side for UP/Down Stream traffic, is it..?
Is there any thing to do with WLC QOS part ...? I mean to say any config on WLC required to accomplish this..?
KVS
07-22-2013 06:44 AM
Nope... It's a policy map that is used in the wired side.
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: